Difference between revisions of "Mesh Converter/en"
Line 265: | Line 265: | ||
-f, --force | -f, --force | ||
− | + | Setting a limit on the maximum number of vertices per object, where 'arg' is the value (it is not specified by default): | |
--max-vertex arg | --max-vertex arg |
Revision as of 14:35, 19 May 2020
Scope
The W4 game engine uses its own asset storage format. Therefore, before using a third-party asset, it must be converted. You can do this using the Mesh Converter tool that comes with the W4 SDK.
Mesh Converter converts assets from Autodesk FBX (.fbx) format. Other formats are not supported.
Technical limitations
Mesh Converter can convert any fbx with the following restrictions:
1. Due to the hardware and software features of some popular device models, a skinned mesh may contain:
- no more than 28 bones
- no more than 8 vertices per bone
How to use
Downloading the project repository is described in the article Quick Start. The W4MeshConverter.bin file is located in the w4framework/tools directory. The conversion should be started from the command line, as described in the following example and in the section Short manual.
Mesh Exmple
Preparing
Take the Utah teapot as an example. If you view the file using the utility Autodesk FBX Review, you will see approximately the same as in the following figure.
Pay attention to the position of the spout of the teapot when viewing fbx, we will return to this later.
Converting
Copy the model file to the converter directory.
Next, to convert the model to the W4 Engine format (asset), you should:
./W4MeshConverter utah-teapot.fbx teapot
As a result, the 'teapot' directory will appear. It contains asset data.
Adding to the project structure
To work with an asset, you need to copy its directory (in our case, it is 'teapot') into the directory 'resources' of the project. The resources directory is located at the same level of the project structure as the 'sources' directory. Thus, the structure of the project will become similar to the following:
. └── W4TemplateGame ├── resources │ └── teapot │ ├── Animations │ ├── BoneInfo │ ├── Materials │ │ ├── defaultMaterial.matInst │ │ └── defaultSkinnedMaterial.matInst │ ├── Splines │ ├── teapot.asset │ └── VertexData │ ├── Utah Teapot Quads_0.ib │ └── Utah Teapot Quads.vb └── sources └── main.cpp
Code example
Loading:
auto asset = Asset::load(Path("resources/teapot", "teapot.asset"));
Adding to Render (show on screen):
auto root = RootNode::make(); root->addChild(asset->getRoot()); Render::instance().getPass(0)->setRoot(root);
Full source code for the example:
#include "W4Framework.h" W4_USE_UNSTRICT_INTERFACE class AssetSample : public w4::IGame { public: AssetSample() = default; ~AssetSample() = default; void onStart() override { auto cam = Render::instance().getScreenCamera(); cam->setWorldTranslation({0.f, 0, -50.f}); auto asset = Asset::load(Path("resources/teapot", "teapot.asset")); auto root = RootNode::make(); root->addChild(asset->getRoot()); Render::instance().getPass(0)->setRoot(root); } }; W4_RUN(AssetSample)
Result
As a result of execution, the same teapot should be displayed, but with a slight difference.
If you compare the drawings, you will notice that the spout of the teapot in the FBX Review is directed in one direction, and as a result of the program in the other. This is due to differences in coordinate systems.
The FBX coordinate system Scene Axis and Unit Conversion is right-handed (with the Y coordinate direction up, whereas W4 coordinate system is left-sided (the Y axis is also directed up).
Animated mesh Exmple
Working with animated meshes is not much different from the one described above.
Preparing
An animated model can be found on the Internet. Take, for example, the Rigged Hand.
If you view it using Autodesk FBX Review you will see something like the following:
Converting
As in the example with a simple mesh, you should copy the model to the converter directory and convert it to the W4 Engine format:
./W4MeshConverter Hand_rigged.FBX hand
As a result, the 'hand' directory will appear. It contains asset data.
Adding to the project structure
Copy the 'hand' directory to the 'resources' directory of the project. An approximate project structure after this:
. └── W4TemplateGame ├── resources │ └── hand │ ├── Animations │ │ └── Take 001.ssa │ ├── BoneInfo │ │ ├── bone_main_hande.skeleton │ │ └── Hand_rigged.skin │ ├── hand.asset │ ├── Materials │ │ ├── defaultMaterial.matInst │ │ └── defaultSkinnedMaterial.matInst │ ├── Splines │ └── VertexData │ ├── Hand_rigged_0.ib │ └── Hand_rigged.vb └── sources └── main.cpp
Code example
Download asset and add it to the render tree:
auto asset = Asset::load(Path("resources/hand", "hand.asset")); render::getRoot()->addChild(asset->getRoot());
If we try to build the project now, we will not see anything. Because the camera is "inside" the asset.
Take the camera and move it away (you may need to set other values, depending on the size of the browser window, the size of the object, etc.):
auto cam = render::getScreenCamera(); cam->setWorldTranslation({0.f, 125.f, -300.f});
If you assemble the project now, a hand will appear on the screen, but it will not move.
To move it, you need to run the animator on the corresponding skinned mesh. It is known that we have one skinned mesh and it has one animation, so in a loop we go through the entire asset tree and all skinned meshes in it and we will play the animation (in our example - the first one):
asset->getRoot()->traversal([&](Node& node) { if(node.is<SkinnedMesh>()) { auto skinned = node.as<SkinnedMesh>(); skinned->getAnimator(0).setIsLooped(true); skinned->play(0); } });
Full source code for the example:
#include "W4Framework.h" W4_USE_UNSTRICT_INTERFACE class MeshAnimatedSample : public w4::IGame { public: MeshAnimatedSample() = default; void onStart() override { auto asset = Asset::load(Path("resources/hand", "hand.asset")); render::getRoot()->addChild(asset->getRoot()); auto cam = render::getScreenCamera(); cam->setWorldTranslation({0.f, 150.f, -300.f}); asset->getRoot()->traversal([&](Node &node) { if (node.is<SkinnedMesh>()) { auto skinned = node.as<SkinnedMesh>(); skinned->getAnimator(0).setIsLooped(true); skinned->play(0); } }); } }; W4_RUN(MeshAnimatedSample)
Result
As a result of the above program, the animation will play:
Short manual
Basics
Convert utah-teapot.fbx to asset with the name 'asset' current directory:
./W4MeshConverter utah-teapot.fbx
Convert utah-teapot.fbx to asset with the name 'teapot' current directory:
./W4MeshConverter utah-teapot.fbx teapot
Convert utah-teapot.fbx to asset with the name 'teapot' which will be saved in the directory ~/some/dir:
./W4MeshConverter utah-teapot.fbx teapot ~/some/dir
Common keys
Show manual:
-h, --help
Scene statistics output:
-v, --verbose
Example of statistics:
(DEBUG) ==================== Scene statistics ==================== (DEBUG) Nodes: 2 (DEBUG) Geometries: 1 (DEBUG) Poses: 0 (DEBUG) Materials: 1 (DEBUG) Textures: 0 (DEBUG) ====================== Axis & Scale ====================== (DEBUG) Up: +Y, Front: +ParityOdd, System: RightHanded (DEBUG) Scale: 1.000000 (DEBUG) ================ Mesh: Red_label ================ (DEBUG) Vertex count: 404 (DEBUG) Index count: 2118 (DEBUG) All polygons are triangles: 1 (DEBUG) ========================================================== (DEBUG) create default material... (DEBUG) create default skinned material...
Size control (scale) on the conversion, where 'arg' is the value. For example (10, 1, 0.1):
--scale arg
Flip vertical axis V of texture coordinates. If the flag is specified, then a transformation of the form V = 1.0 - V will be applied to the texture coordinates:
--uv-flip
Setting limitations
For all Meshs, restrictions on the maximum number of vertices and indices can be set. For Skinned Meshs, restrictions on the maximum number of bones and the maximum number of bones per vertex can be set.
A model that does not meet the specified restrictions can be forcedly converted using the flag 'force', however, performance is not guaranteed in this case:
-f, --force
Setting a limit on the maximum number of vertices per object, where 'arg' is the value (it is not specified by default):
--max-vertex arg
Установка ограничения на максимальное количество индексов на объект, где arg - значение, по умолчанию не задано:
--max-index arg
Установка ограничения на максимальное количество костей для Skinned Mesh, где arg - значение, по умолчанию 28, при установке значения выше, чем значение по умолчанию, работоспособность не гарантируется:
--max-bones arg
Установка ограничения на максимальное количество костей на вершину для Skinned Mesh, где arg - значение, по умолчанию 8, при установке значения выше, чем значение по умолчанию, работоспособность не гарантируется:
--max-bones-per-vertex arg